Obsah fóra koppel.cz koppel.cz
Díky, krtku...
 
 FAQFAQ   HledatHledat   Seznam uživatelůSeznam uživatelů   Uživatelské skupinyUživatelské skupiny   RegistraceRegistrace 
 ProfilProfil   Soukromé zprávySoukromé zprávy   PřihlášeníPřihlášení 

WL500G & Huawei E270

 
Přidat nové téma   Zaslat odpověď    Obsah fóra koppel.cz -> English: Our firmware for USB modems
Zobrazit předchozí téma :: Zobrazit následující téma  
Autor Zpráva
pino71



Založen: 24.1.2008
Příspěvky: 9

PříspěvekZaslal: čt leden 24, 2008 12:59 pm    Předmět: WL500G & Huawei E270 Citovat

I've WL500Gp & Huawei E270:
With these instructions http://koppel.cz/cdmawifi/postupy/E220 i've no connection and this log:

Jan 1 01:08:58 pppd[417]: Connect script failed
Jan 1 01:08:59 pppd[417]: Exit.
Jan 1 01:09:30 pppd[445]: pppd 2.4.2 started by admin, uid 0
Jan 1 01:10:31 pppd[445]: Connect script failed
Jan 1 01:10:32 pppd[445]: Exit.
Jan 1 01:11:03 pppd[475]: pppd 2.4.2 started by admin, uid 0
Jan 1 01:12:04 pppd[475]: Connect script failed
Jan 1 01:12:05 pppd[475]: Exit.

Work fine with E220.
Anyone can hekp me
Návrat nahoru
Zobrazit informace o autorovi Odeslat soukromou zprávu
admin
Site Admin


Založen: 30.6.2002
Příspěvky: 1233
Bydliště: Prague, Czech republic

PříspěvekZaslal: čt leden 24, 2008 2:03 pm    Předmět: Citovat

Please include copy of http://my.router/Main_SysInfo_Content.asp
Návrat nahoru
Zobrazit informace o autorovi Odeslat soukromou zprávu Odeslat e-mail
pino71



Založen: 24.1.2008
Příspěvky: 9

PříspěvekZaslal: pá leden 25, 2008 8:51 am    Předmět: Citovat

Ok this is the Main_Sysinfo_Content.asp

Status Information
Linux version 2.4.20 (root@localhost) (gcc version 3.2.3 with Broadcom modifications) #4 Čt lis 22 15:38:18 CET 2007
1.9.2.7-8-USB-1.67

Thu Jan 1 00:05:16 GMT 1970
00:05:16 up 5 min, load average: 0.08, 0.03, 0.00

--------------------------------------------------------------------------------
Interfaces
br0 Link encap:Ethernet HWaddr 00:1D:60:37:20:C2
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:992 errors:0 dropped:0 overruns:0 frame:0
TX packets:1679 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:68488 (66.8 KiB) TX bytes:1462428 (1.3 MiB)

eth0 Link encap:Ethernet HWaddr 00:1D:60:37:20:C2
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:464 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 B) TX bytes:101923 (99.5 KiB)
Interrupt:4 Base address:0x1000

eth1 Link encap:Ethernet HWaddr 00:1D:60:37:20:C2
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:991 errors:0 dropped:0 overruns:0 frame:1534
TX packets:1938 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:82356 (80.4 KiB) TX bytes:1499427 (1.4 MiB)
Interrupt:12 Base address:0x2000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MULTICAST MTU:16436 Metric:1
RX packets:759 errors:0 dropped:0 overruns:0 frame:0
TX packets:759 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:102872 (100.4 KiB) TX bytes:102872 (100.4 KiB)

vlan0 Link encap:Ethernet HWaddr 00:1D:60:37:20:C2
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:464 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:101923 (99.5 KiB)


--------------------------------------------------------------------------------
Routing Table
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo

--------------------------------------------------------------------------------
ARP Table
IP address HW type Flags HW address Mask Device
192.168.1.190 0x1 0x2 00:1C:BF:1C:00:FE * br0

--------------------------------------------------------------------------------
IP Tables
Chain INPUT (policy ACCEPT 34 packets, 12410 bytes)
pkts bytes target prot opt in out source destination
0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID
1576 156K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
307 75781 ACCEPT all -- br0 * 0.0.0.0/0 0.0.0.0/0 state NEW
30 1800 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 state NEW
0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0

Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID
0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
0 0 ACCEPT all -- br0 * 0.0.0.0/0 0.0.0.0/0 state NEW
0 0 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 state NEW
0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0

Chain OUTPUT (policy ACCEPT 2433 packets, 1541K bytes)
pkts bytes target prot opt in out source destination

Chain logaccept (0 references)
pkts bytes target prot opt in out source destination
0 0 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 state NEW LOG flags 15 level 4 prefix `ACCEPT '
0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0

Chain logdrop (0 references)
pkts bytes target prot opt in out source destination
0 0 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 state NEW LOG flags 15 level 4 prefix `DROP '
0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0

--------------------------------------------------------------------------------
IP Tables NAT
Chain PREROUTING (policy ACCEPT 52 packets, 3699 bytes)
pkts bytes target prot opt in out source destination

Chain POSTROUTING (policy ACCEPT 38 packets, 3447 bytes)
pkts bytes target prot opt in out source destination

Chain OUTPUT (policy ACCEPT 38 packets, 3447 bytes)
pkts bytes target prot opt in out source destination

Chain VSERVER (0 references)
pkts bytes target prot opt in out source destination

--------------------------------------------------------------------------------
Mount points
/dev/root on / type squashfs (ro)
none on /dev type devfs (rw)
proc on /proc type proc (rw)
ramfs on /tmp type ramfs (rw)
usbfs on /proc/bus/usb type usbfs (rw)

--------------------------------------------------------------------------------
Filesystem info
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/root 3008 3008 0 100% /

--------------------------------------------------------------------------------
Partitions

--------------------------------------------------------------------------------
USB HDD info
Attached devices:

Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: HUAWEI Model: Mass Storage Rev: 2.31
Type: CD-ROM ANSI SCSI revision: 02
Host scsi0: usb-storage
Vendor: HUAWEI Technologies
Product: HUAWEI Mobile
Serial Number: None
Protocol: Transparent SCSI
Transport: Bulk
GUID: 12d110030000000000000000
Attached: Yes

--------------------------------------------------------------------------------
Process List
PID Uid VmSize Stat Command
1 admin 672 S /sbin/init
2 admin SW [keventd]
3 admin SWN [ksoftirqd_CPU0]
4 admin SW [kswapd]
5 admin SW [bdflush]
6 admin SW [kupdated]
7 admin SW [mtdblockd]
63 admin 312 S telnetd
68 admin 468 S httpd vlan1
74 admin 364 S klogd
75 nobody 488 S [dnsmasq]
76 admin 400 S syslogd -m 0 -O /tmp/syslog.log -S -l 7
80 admin 496 S upnp -D -L br0 -W vlan1
81 admin SW [khubd]
89 admin 276 S lpd
91 admin 260 S p9100d -f /dev/usb/lp0 0
95 admin 344 S waveservermain
97 admin 348 S rcamdmain
101 admin SW [usb-storage-0]
102 admin SW [scsi_eh_0]
103 admin 484 S /bin/sh ./dial 99
105 admin 320 S infosvr br0
106 admin 440 S watchdog
110 admin 348 S ntp
311 admin 460 S sh -c /tmp/../usr/sbin/sysinfo > /tmp/sysinfo.htm
312 admin 508 S /bin/sh /tmp/../usr/sbin/sysinfo
322 admin 280 S sleep 5
333 admin 400 R ps

--------------------------------------------------------------------------------
Kernel Modules
usbserial 25492 0
acm 6820 0 (unused)
usb-storage 62568 0
sd_mod 13292 0 (unused)
scsi_mod 70216 2 [usb-storage sd_mod]
videodev 8344 0 (unused)
audio 50680 0 (unused)
soundcore 5320 0 [audio]
printer 12676 0 (unused)
ehci-hcd 31660 0 (unused)
usb-uhci 28564 0 (unused)
usbcore 83904 1 [usbserial acm usb-storage audio printer ehci-hcd usb-uhci]
ip_nat_ftp 3944 0 (unused)
ip_conntrack_ftp 5248 1
ipt_NETMAP 992 0 (unused)
ip_nat_starcraft 2224 0 (unused)
wl 728984 0 (unused)
et 31288 0 (unused)

--------------------------------------------------------------------------------
USB Devices
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 4
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.04
S: Manufacturer=Linux 2.4.20 ehci_hcd
S: Product=PCI device 1106:3104
S: SerialNumber=01:03.2
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=120
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=100
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=1003 Rev= 0.00
S: Manufacturer=HUAWEI Technologies
S: Product=HUAWEI Mobile
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=serial
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=serial
E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms

--------------------------------------------------------------------------------
FlashFS file list
tmp/local
tmp/local/dial
tmp/local/dial/update
tmp/local/dial/dial
tmp/local/dial/chap-secrets
tmp/local/dial/param
tmp/local/dial/param/param1
tmp/local/dial/param/desc
tmp/local/dial/param/param2
tmp/local/dial/param/param3
tmp/local/dial/param/param4
tmp/local/dial/gprs
tmp/local/dial/gprs.chat
tmp/local/sbin
tmp/local/sbin/post-backup
tmp/local/sbin/pre-backup
tmp/local/sbin/post-mount
tmp/local/sbin/resetpressed
tmp/local/sbin/pre-shutdown
tmp/local/sbin/post-boot
tmp/local/sbin/ez-setup
tmp/local/sbin/post-firewall
tmp/local/sbin/pre-boot
tmp/local/.files
tmp/local/root

--------------------------------------------------------------------------------
CPU Info
system type : Broadcom BCM4704 chip rev 9 pkg 0
processor : 0
cpu model : BCM3302 V0.6
BogoMIPS : 263.78
wait instruction : no
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : no
hardware watchpoint : no
VCED exceptions : not available
VCEI exceptions : not available
unaligned_instructions : 3
dcache hits : 0
dcache misses : 0
icache hits : 0
icache misses : 0
instructions : 0

--------------------------------------------------------------------------------
Memory
total: used: free: shared: buffers: cached:
Mem: 30961664 14835712 16125952 0 1765376 6492160
Swap: 0 0 0
MemTotal: 30236 kB
MemFree: 15748 kB
MemShared: 0 kB
Buffers: 1724 kB
Cached: 6340 kB
SwapCached: 0 kB
Active: 3864 kB
Inactive: 5972 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 30236 kB
LowFree: 15748 kB
SwapTotal: 0 kB
SwapFree: 0 kB

If you want i can post the syslog.

Thank You
Návrat nahoru
Zobrazit informace o autorovi Odeslat soukromou zprávu
engy
CDMA Developer


Založen: 4.11.2004
Příspěvky: 1281

PříspěvekZaslal: pá leden 25, 2008 1:47 pm    Předmět: Citovat

You are using user dial file which doesn't include required debug files like /tmp/chat.log file. Look at /tmp/ppp/gprs/* files how to create chat.log debug file. This modem has two serial lines. Try to use the second one (/dev/usb/tts/1 instead of /dev/usb/tts/0).
Návrat nahoru
Zobrazit informace o autorovi Odeslat soukromou zprávu
pino71



Založen: 24.1.2008
Příspěvky: 9

PříspěvekZaslal: po leden 28, 2008 12:27 pm    Předmět: Citovat

Please you can help me to do this? I'm a newbie...
How to use the second one (/dev/usb/tts/1 instead of /dev/usb/tts/0)?

Thank You very much
Návrat nahoru
Zobrazit informace o autorovi Odeslat soukromou zprávu
engy
CDMA Developer


Založen: 4.11.2004
Příspěvky: 1281

PříspěvekZaslal: po leden 28, 2008 2:44 pm    Předmět: Citovat

Try change it in /usr/local/dial/gprs then flashfs save && flashfs commit
Návrat nahoru
Zobrazit informace o autorovi Odeslat soukromou zprávu
pino71



Založen: 24.1.2008
Příspěvky: 9

PříspěvekZaslal: po leden 28, 2008 6:48 pm    Předmět: Citovat

I try it. Same result:

Jan 1 01:11:03 pppd[475]: pppd 2.4.2 started by admin, uid 0
Jan 1 01:12:04 pppd[475]: Connect script failed
Jan 1 01:12:05 pppd[475]: Exit.
Návrat nahoru
Zobrazit informace o autorovi Odeslat soukromou zprávu
engy
CDMA Developer


Založen: 4.11.2004
Příspěvky: 1281

PříspěvekZaslal: po leden 28, 2008 8:13 pm    Předmět: Citovat

I have no idea how to solve this because I have not this modem Crying or Very sad
Návrat nahoru
Zobrazit informace o autorovi Odeslat soukromou zprávu
sonix_flex



Založen: 26.4.2008
Příspěvky: 1

PříspěvekZaslal: so duben 26, 2008 8:24 pm    Předmět: Citovat

Hello everybody! I have a WL-500gP and a Huawei E270, but it would work because it tries to communicate and fails.

The Huawei is configuered to work without the need of the pincode and I use the GPRS/EDGE/UMTS Connection mode with:

Username:
Password:
APN: drei.at
Dial Number: *99#
USB device id: 1


USB device Vendor ID: 0x12d1
USB device Product ID: 0x1003
USB device packet size: 0


Log:

Jan 1 01:00:16 pppd[145]: pppd 2.4.2 started by admin, uid 0
Jan 1 01:00:18 pppd[145]: Serial connection established.
Jan 1 01:00:18 pppd[145]: Using interface ppp0
Jan 1 01:00:18 pppd[145]: Connect: ppp0 <--> /dev/usb/tts/1
Jan 1 01:00:49 pppd[145]: LCP: timeout sending Config-Requests
Jan 1 01:00:49 pppd[145]: Connection terminated.
Jan 1 01:00:49 pppd[145]: Receive serial link is not 8-bit clean:
Jan 1 01:00:49 pppd[145]: Problem: all had bit 7 set to 0
Jan 1 01:00:50 pppd[145]: Exit.

Is there a Possibility to have a better debug view or is there already a solution for my problem.

Is there somebody who can help me? please!


THX

Sonix
Návrat nahoru
Zobrazit informace o autorovi Odeslat soukromou zprávu
engy
CDMA Developer


Založen: 4.11.2004
Příspěvky: 1281

PříspěvekZaslal: ne duben 27, 2008 11:14 am    Předmět: Citovat

Try set USB device ID to 1 or download minicom via ipkg and play with it.
Návrat nahoru
Zobrazit informace o autorovi Odeslat soukromou zprávu
Thomas



Založen: 12.7.2008
Příspěvky: 5

PříspěvekZaslal: so červenec 12, 2008 2:03 pm    Předmět: Re: WL500G & Huawei E270 Citovat

This problem is a PIN code problem..
Switch your SIM card to "without PIN mode"

Thomas

ps: I see this log when I try first time, to connect on.
My problem was finished, when I don't use PIN.

pino71 napsal:
I've WL500Gp & Huawei E270:
With these instructions http://koppel.cz/cdmawifi/postupy/E220 i've no connection and this log:

Jan 1 01:08:58 pppd[417]: Connect script failed
Jan 1 01:08:59 pppd[417]: Exit.
Jan 1 01:09:30 pppd[445]: pppd 2.4.2 started by admin, uid 0
Jan 1 01:10:31 pppd[445]: Connect script failed
Jan 1 01:10:32 pppd[445]: Exit.
Jan 1 01:11:03 pppd[475]: pppd 2.4.2 started by admin, uid 0
Jan 1 01:12:04 pppd[475]: Connect script failed
Jan 1 01:12:05 pppd[475]: Exit.

Work fine with E220.
Anyone can hekp me
Návrat nahoru
Zobrazit informace o autorovi Odeslat soukromou zprávu
Zobrazit příspěvky z předchozích:   
Přidat nové téma   Zaslat odpověď    Obsah fóra koppel.cz -> English: Our firmware for USB modems Časy uváděny v GMT + 1 hodina
Strana 1 z 1

 
Přejdi na:  
Nemůžete odesílat nové téma do tohoto fóra.
Nemůžete odpovídat na témata v tomto fóru.
Nemůžete upravovat své příspěvky v tomto fóru.
Nemůžete mazat své příspěvky v tomto fóru.
Nemůžete hlasovat v tomto fóru.


Powered by phpBB © 2001, 2005 phpBB Group
Český překlad phpBB Czech - www.phpbbcz.com